| Customization: | Available |
|---|---|
| Noise: | ≥105dB |
| Hi-Fi: | Hi-Fi |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
W-208&W-208P is a line array system which is made of two 8"neodymium woofers, one 2.5"titanium neodymium compression drivers and high-performance low-distortion compression driver with innovative horn design of wave phase philosophy. Wherever low frequency extension is required,a W-208&W-208P will integrate seamlessly with W-18&W-18P line array sub-bass system in a standard configuration. Each enclosure is equipped with rigging system, allowing flown array to be constructed rapidly and safely. W-208&W-208P is very versatile and scalable for a wide range of applications in touring performance, corporate and fixed installation fields.
W-18/W-18P is dedicated high performance sub-bass system designed to augment the low frequency output of the W-208&W-208P, W-18&W-18P is a sub-bass enclosure which must be flown with W-208&W-208P. So its physical dimensions are identical to the W-208&W-208P and it is equipped with the same proprietary rigging system. It features with one 18"woofers with magnet structure and suspensions engineered for maximum linear excursion.| Model | W-208 & W-18/W-208P & W-18P(Active) |
| Type | Line array system |
| Line array sub-bass system(W-18/W-18P) | |
| Frequency Response | 70Hz-20KHz±3dB |
| 40Hz-500Hz±3dB(W-18/W-18P) | |
| Power handling | LF400W(RMS)800W(PEAK) |
| HF 90W(RMS)180W(PEAK) | |
| 600W(RMS)1200W(PEAK)(W-18/W-18P) | |
| Power amp | 600W/8ohm (W-208P)900W/8ohm(W-18P) |
| Amplifier type | Switching power amp, class D circuit |
| Other functions | Built-in crossover(W-208P) |
| Sensitivity | LF 97dB(1W1M) |
| HF 108dB(1W1M) | |
| 106dB(1W1M)(W-18/W-18P) | |
| MaxS.P.L | LF 122dB(PEAK/1M) |
| HF 128dB(PEAK/1M) | |
| 130dB(PEAK/1M)(W-18/W-18P) | |
| LF section | 2×8"(210mm) neodymium woofer |
| 65mm(2.5in)coil | |
| 1×18"(460mm) woofers | |
| 100mm(4in)coil(W-18/W-18P) | |
| Nominal impedance | 16 ohm |
| 8 ohm(W-18/W-18P) | |
| HF section | 1×2.5" neodymium compression driver |
| with 65mm titanium diaphragm | |
| Nominal impedance | 16 ohm |
| Output section | 2-channel |
| Dispersion pattern | 110°H×10°V |
| Finish | Water-proof,wear-resistant textured |
| black paint | |
| Array design | Arrays of less than 3×W-208 will |
| provide poor dispersion control and | |
| are neither recommended nor supported | |
| Speaker cables | LF 1(+)1(-) HF 2(+)2(-) |
| 1(+)1(-) (W-18/W-18P) | |
| Rigging system | Please refer to the W-208 user's |
| manual before any operation | |
| Input connectors | 2×NL4MP speakon |
| Recommend crossover | LF 70Hz-2KHz |
| HF 2KHz-20KHz 35Hz-120Hz(W-18/W-18P) | |
| Dimensions | 640 x 261 x 380mm(W x H x D)(W-208/W-208P) |
| 640 x 502 x 600mm(W x H x D)(W-18/W-18P) | |
| Package dimensions | 700 x 320 x 440mm/0.10cbm(W-208/W-208P) |
| 700 x 570 x 670mm/0.27cbm(W-18/W-18P) | |
| Enclosure | Birch plywood |
| Net weight | 23kg(W-208)26kg(W-208P)42kg(W-18)45kg(W-18P) |
| Gross weight | 26kg(W-208)29kg(W-208P)45kg(W-18)48kg(W-18P) |
Q1. Can we have our logo or company information on your profucts or packages?
){kind=link}