1. Line array speaker
2. Birch plywood, water-proof
3. CE, RoHS certifica
4. Neodymium-magnet, reliable
5. Good after sale service
Description and application
W-210A is a line array speaker which is made of two 10'' neodymium woofers, two 2'' titanium neodymium compression drivers and high-performance low-distortion compression driver with innovative horn design of waves phase philosophy. It is a zero interfere line array with multi- speaker combined to produce accurate directivity and maximum dynamic impact. Wherever low frequency extension is required, a w-210A will integrate seamlessly with w-250A line array sub-bass system in a standard configuration. Each enclosure is equipped with rigging system, allowing flown array to be constructed rapidly and safely. W-210A is very versatile and scalable for a wide range of applications in touring performance, corporate and fixed installation fields.
Description and application
W-250A is dedicated high performance sub-bass system designed to augment the low frequency output of the w-210A, w-250A is a sub-bass enclosure which must be flown with w-210A. So its physical dimensions are identical to the w-210A and it is equipped with the same proprietary rigging system. It features with twin 15" neodymium woofers with magnet structure and suspensions engineered for maximum linear excursion
Model w-210A/w-250A
Type line array system
Line array sub-bass system(w-250A)
Frequency response 55Hz-20kHz± 3dB
40Hz-150Hz± 3dB(w-250A)
Directivity index(dl) 12(± 2)1.2kHz-16kHz
Power handing lf 500W(RMS)1000W(peak)
Hf 160W(RMS)320W(peak)
1200W(RMS)2400W(peak)(w-250A)
Sensitivity lf 99dB(1W@1m)
Hf 108dB(1W@1m)
112dB(1W@1m)(w-250A)
Maxs. P. L lf 127dB(peak/1m)
Hf 127dB(peak/1m)
143dB(peak/1m)(w-250A)
Lf section 2× 10"(260mm) neodymium woofer
75mm(3in)coil
Components 2× 15"(380mm) neodymium woofers
100mm(4in)coil(w-250A)
Nominal impedance 16 ohm
4 ohm(w-250A)
Hf section 2× 2"neodymium compression driver
With 51mm titanium diaphragm
Nominal impedance 16 ohm
Output section 2-channel
Dispersion pattern 110° H× 9° V
Finish water-proof, wear-resistant textured black paint
Array design arrays of less than 3× W-210A will
Provide poor dispersion control and
Are neither recommended nor supported
Speaker cables lf 1(+)1(-) hf 2(+)2(-)
1(+)1(-) (w-250A)
Rigging system please refer to the w-210A user
Manual before any operation
Input connectors 2× Nl4MP speakon
Recommend crossover lf 45Hz-1200Hz
Hf 1200Hz-20kHz
35Hz-120Hz(w-250A)
Dimensions 855× 293× 600mm(w× H× D)
855× 610× 820mm(w× H× D)(w-250A)
Package dimensions 925× 360× 670mm/0.22cbm
925× 680× 890mm/0.56cbm(w-250A)
Enclosure birch plywood
Net weight 42kg (w-210A)/ 81kg (w-250A)
Gross weight 45kg (w-210A)/ 84kg (w-250A)
Certifications
Audited Supplier 
){kind=link}