| Customization: | Available |
|---|---|
| Application: | Commercial |
| Certification: | CE, RoHS, CCC, FCC, ETL, MET |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
W-210A is a line array audio mixer which is made of two 10" neodymium woofers, two 2" titanium neodymium compression drivers and high-performance low-distortion compression driver with innovative horn design of waves phase philosophy. It is a zero interfere line array loudspeaker with multi- speaker combined to produce accurate directivity and maximum dynamic impact. Wherever low frequency extension is required, a W-210A loudspeaker will integrate seamlessly with W-250A line array sub-bass system in a standard configuration. Each enclosure is equipped with rigging system, allowing flown array to be constructed rapidly and safely. W-210A concert loudspeaker is very versatile and scalable for a wide range of applications in touring performance, corporate and fixed installation fields.
| Model | W-210A/W-250A |
| Type | Line array system |
| Line array sub-bass system(W-250A) | |
| Frequency Response | 55Hz-20KHz±3dB |
| 40Hz-150Hz±3dB(W-250A) | |
| Directivity index(Dl) | 12(±2)1.2KHz-16KHz |
| Power handing | LF 500W(RMS)1000W(PEAK) |
| HF 160W(RMS)320W(PEAK) | |
| 1200W(RMS)2400W(PEAK)(W-250A) | |
| Sensitivity | LF 99dB(1Wat1M) |
| HF 108dB(1Wat 1M) | |
| 112dB(1W at 1M)(W-250A) | |
| Max S.P.L | LF 127dB(PEAK/1M) |
| HF 127dB(PEAK/1M) | |
| 143dB(PEAK/1M)(W-250A) | |
| LF section | 2×10"(260mm) neodymium woofer |
| 75mm(3in)coil | |
| Components | 2×15"(380mm) neodymium woofers |
| 100mm(4in)coil(W-250A) | |
| Nominal impedance | 16 ohm |
| 4 ohm(W-250A) | |
| HF section | 2×2"neodymium compression driver |
| with 51mm titanium diaphragm | |
| Nominal impedance | 16 ohm |
| Output section | 2-channel |
| Dispersion pattern | 110°H×9°V |
| Finish | Water-proof,wear-resistant textured black paint |
| Array design | Arrays of less than 3×W-210A will |
| provide poor dispersion control and | |
| are neither recommended nor supported | |
| Speaker cables | LF 1(+)1(-) HF 2(+)2(-) |
| 1(+)1(-) (W-250A) | |
| Rigging system | Please refer to the W-210A user |
| manual before any operation | |
| Input connectors | 2×NL4MP speakon |
| Recommend crossover | LF 45Hz-1200Hz |
| HF 1200Hz-20KHz | |
| 35Hz-120Hz(W-250A) | |
| Dimensions | 855×293×600mm(W×H×D) |
| 855×610×820mm(W×H×D)(W-250A) | |
| Package dimensions | 925×360×670mm/0.22cbm |
| 925×680×890mm/0.56cbm(W-250A) | |
| Enclosure | Birch plywood |
| Net weight | 42kg (W-210A)/ 81kg (W-250A) |
| Gross weight | 45kg (W-210A)/ 84kg (W-250A) |
Q1. Can we have our logo or company information on your profucts or packages?
){kind=link}