Customization: | Available |
---|---|
Noise: | <95dB |
Hi-Fi: | Hi-Fi |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Model |
W-208B & W-18/W-208 & W-18BP(Active) |
Type |
Line array system |
Line array sub-bass system(W-18/W-18P) |
|
Frequency Response |
75Hz-18KHz±3dB |
35Hz-500Hz±3dB(W-18/W-18P) |
|
Power handling (Line array W-208B) |
LF400W(RMS)800W(PEAK) |
HF 90W(RMS)180W(PEAK) |
|
Subwoofer power handling(W-18B) |
600W(RMS)1200W(PEAK)(W-18/W-18P) |
Power amp |
900W/8ohm(W-18BP) |
Amplifier type |
Switching power amp, class D circuit |
Other functions |
Built-in DSP (W-208P) |
Sensitivity |
LF 101dB(1W1M) |
HF 103dB(1W1M) |
|
Subwoofer |
102dB(1W1M)(W-18/W-18P) |
MaxS.P.L |
LF 128dB(PEAK/1M) |
HF 130dB(PEAK/1M) |
|
Subwoofer |
136dB(PEAK/1M)(W-18B/W-18BP) |
LF section |
2×8"(210mm) neodymium woofer |
65mm(2.5in)coil |
|
1×18"(460mm) woofers |
|
100mm(4in)coil(W-18B/W-18BP) |
|
Nominal impedance |
16 ohm |
8 ohm(W-18/W-18P) |
|
HF section |
1×3" neodymium compression driver |
with 75mm titanium diaphragm |
|
Nominal impedance |
16 ohm |
Output section |
2-channel |
Dispersion pattern |
100°H×10°V |
Finish |
Water-proof,wear-resistant textured |
black paint |
|
Array design |
Arrays of less than 3×W-208 will |
provide poor dispersion control and |
|
are neither recommended nor supported |
|
Speaker cables |
LF 1(+)1(-) HF 2(+)2(-) |
1(+)1(-) (W-18/W-18P) |
|
Rigging system |
Please refer to the W-208 user's |
manual before any operation |
|
Input connectors |
2×NL4MP speakon |
Recommend crossover |
LF 75Hz-2KHz |
HF 2KHz-18KHz 35Hz-500Hz(W-18/W-18P) |
|
Dimensions |
550 x 265 x 360mm(W x H x D)(W-208B) |
550 x 650 x 780mm(W x H x D)(W-18B/W-18BP) |
|
Package dimensions |
430 x 630 x 360mm/0.10cbm(W-208B) |
720 x 860 x 620mm/0.38cbm(W-18/W-18P) |
|
Enclosure |
Birch plywood |
Net weight |
23kg(W-208B) 60kg(W-18B) 66.5kg(W-18BP) |
Gross weight |
26kg(W-208B) 65kg(W-18) 72kg(W-18P) |