Customization: | Available |
---|---|
Noise: | <95dB |
Hi-Fi: | Hi-Fi |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Model | W-208 & W-18/W-208P & W-18P(Active) |
Type | Line array system |
Line array sub-bass system(W-18/W-18P) | |
Frequency Response | 70Hz-20KHz±3dB |
40Hz-500Hz±3dB(W-18/W-18P) | |
Power handling | LF400W(RMS)800W(PEAK) |
HF 90W(RMS)180W(PEAK) | |
600W(RMS)1200W(PEAK)(W-18/W-18P) | |
Power amp | 600W/8ohm (W-208P)900W/8ohm(W-18P) |
Amplifier type | Switching power amp, class D circuit |
Other functions | Built-in crossover(W-208P) |
Sensitivity | LF 97dB(1W@1M) |
HF 108dB(1W@1M) | |
106dB(1W@1M)(W-18/W-18P) | |
[email protected] | LF 122dB(PEAK/1M) |
HF 128dB(PEAK/1M) | |
130dB(PEAK/1M)(W-18/W-18P) | |
LF section | 2×8"(210mm) neodymium woofer |
65mm(2.5in)coil | |
1×18"(460mm) woofers | |
100mm(4in)coil(W-18/W-18P) | |
Nominal impedance | 16 ohm |
8 ohm(W-18/W-18P) | |
HF section | 1×2.5" neodymium compression driver |
with 65mm titanium diaphragm | |
Nominal impedance | 16 ohm |
Output section | 2-channel |
Dispersion pattern | 110°H×10°V |
Finish | Water-proof,wear-resistant textured |
black paint | |
Array design | Arrays of less than 3×W-208 will |
provide poor dispersion control and | |
are neither recommended nor supported | |
Speaker cables | LF 1(+)1(-) HF 2(+)2(-) |
1(+)1(-) (W-18/W-18P) | |
Rigging system | Please refer to the W-208 user's |
manual before any operation | |
Input connectors | 2×NL4MP speakon |
Recommend crossover | LF 70Hz-2KHz |
HF 2KHz-20KHz 35Hz-120Hz(W-18/W-18P) | |
Dimensions | 640 x 261 x 380mm(W x H x D)(W-208/W-208P) |
640 x 502 x 600mm(W x H x D)(W-18/W-18P) | |
Package dimensions | 700 x 320 x 440mm/0.10cbm(W-208/W-208P) |
700 x 570 x 670mm/0.27cbm(W-18/W-18P) | |
Enclosure | Birch plywood |
Net weight | 23kg(W-208)26kg(W-208P)42kg(W-18)45kg(W-18P) |
Gross weight | 26kg(W-208)29kg(W-208P)45kg(W-18)48kg(W-18P) |