TECHNICAL PARAMETERS
Model	W-310&W-310P
Type	Three-way line array system
Frequency Response	65Hz-18KHz±3dB
Power handling	LF 700W(RMS)2800W(PEAK) MF+HF 250W(RMS)1000W(PEAK)
Sensitivity	LF 103dB(1W@1M) MF+HF 107dB(1W@1M)
Max SPL	LF 132dB(PEAK) MF+HF 138dB(PEAK)
Drivers	LF 2×10"(260mm) neodymium woofer75mm(3in)coil MF 1×8"(210mm) neodymium woofer 50mm(2in)coil HF 2×3" neodymium compression driver with 75mm titanium diaphragm
Nominal impedance	LF 8 ohm MF+HF 8 ohm
Coverage	80°H×10°V
Connections	LF 1(+)1(-) MF+HF 2(+)2(-)
Connectors	2×NL4MP speakon
Finish	Textured high-density polyurethane coating
Enclosure Material	Birch Plywood
Crossover	LF 65Hz-1KHz HF 1KHz-18KHz
Dimensions	700×310×520mm(W×H×D)
Packing Dimensions	590×780×410mm(W×H×D)0.19cbm
Net weight	40kg(W-310)/44kg(W-310P)
Gross weight	44kg(W-310)/48kg(W-310P)
Amplifier type	Switching mode amplifier, class D circuit
Power Output (RMS)	2X900W/8ohm
Weight	3.8kg
Configuration	The amp module is built inside W-310P

Model	W-180&W-180P
Type	Line array subwoofer system
Frequency Response	35Hz-200Hz±3dB
Power handling	1000W(RMS)4000W(PEAK)
Sensitivity	102dB(1W@1M)
Max SPL	136dB(PEAK/1M)
Driver	1×18"(460mm) woofer 100mm(4in)coil
Nominal impedance	8 ohm
Connectors	2×NL4MP speakon
Finish	Textured high-density polyurethane coating
Enclosure Material	Birch Plywood
Dimensions	700×520×780mm(W×H×D)
Packing Dimensions	770×590×860mm(W×H×D)/0.39cbm
Net weight	63.5kg(W-180)/66kg(W180P)
Gross weight	67.5kg(W-180)/70kg(W180P)
Amplifier type	Switching mode amplifier, class D circuit
Power Output (RMS)	900W/8ohm
Weight	2.6kg
Configuration	The amp module is built inside W-180P

Concert Equipment Dual 10 Outdoor Line Array Speaker

Contact Supplier